Add-on modules and accessories
Port modules
| Module | Ports |
|---|---|
| BNMO-4FXO | 4 × FXO |
| BNMO-4FXS | 4 × FXS |
| BNMO-2HYB | 2 × BRI/S0 and 2 × FXS |
| BNMO-4BRI | 4 × BRI/S0 with high-precision clock |
| BNMO-1E1 | 1 × PRI E1 with high-precision clock |
| BNMO-2E1 | 2 × PRI E1 with high-precision clock |
| BNMO-1PRI | 1 × PRI T1/E1 with high-precision clock |
| BNMO-2PRI | 2 × PRI T1/E1 with high-precision clock |
A modular gateway or SBC takes up to three of these; the PCIe card takes two.
Mounting
- BF19Bracket — 19-inch rack bracket for a single beroNet gateway, aluminium.
- BF19BracketDBL — 19-inch bracket for two gateways side by side in 1U. Two outer parts and one centre piece.
- BNTA19Bracket — 19-inch bracket for the telephony appliance.
Cables and adapters
- BFTAdapter — T-adapter that splits one external RJ45 into ports A and B. Four are needed to reach all eight BRI ports of an 8 BRI device.
- BFBridge — bridge that exposes all four PSTN ports of a module on the four external RJ45 sockets, so no T-adapters are needed.
- BF1E1Cross — 1.8 m E1/T1 cross-over cable, pinout 1-2-4-5, for any E1/T1 interconnect.
- BFFXXCable — RJ45 to RJ11, for all analog modules.
- BFTAEAdapter — RJ45 (male) to TAE (female), for analog modules in Germany.
- BFPCM — PCM cable for interconnecting devices.
LTE antennas
- BFANTLTES — small 17 cm antenna for beroNet LTE modules.
- BFANTLTE — magnetic-foot antenna with a 2.5 m cable, for difficult reception.
Prices and availability are in the shop; assembly notes are in the beroNet Wiki.